I finally got to work on a late-model Ford Supercab
rear door.
I placed a small screwdriver in the
notch of the reflector lens and pried it
out.
Then I
used an 8mm socket to remove the screw
behind the reflector lens.
On the
window switch cover I pried upward with a
small screwdriver and then unhooked it
from the back where the cover hooks into the
plastic door panel.
Then with
the small screwdriver I pressed inwards on the
tab on the wire harness and released it from
the switch.
With an
8mm socket I removed the screw behind the
switch cover.
I found
that lifting straight upward unhooked the
plastic door panel from the metal door
frame.
Then the door panel was separated
from the vehicle.
View of
back of plastic door panel.
View of
metal door panel with dust cover.
View
of metal door frame with dust cover partially
removed to replace the outside door latch.
