To remove the speaker on this 2005 Chevy
Trailblazer, I first had to remove the door
panel.
Behind the
door panel, there was this flexible foam dust
cover, and the speaker I needed to remove.
With door panel removed, I disconnected the
speaker wire connector using a flat
screwdriver to press in the lock tab. Then I
pulled the connector apart.
I used a
7mm socket to remove the three mounting
bolts around the speaker.
I had to use a flat putty knife to pry the
speaker housing off the metal door frame.
View of
exposed side of speaker assembly.
View of back side of speaker housing. The red arrows
show the line-up studs, which go into holes in
the sheet metal.
